esphome:
  name: jiecang-desk-controller
  friendly_name: Jiecang Desk Controller
  on_boot:
    # This script is required to initialize the following sensors:
    #    height_pct, height_min, height_max, position1 - position4
    # You can skip this if you don't use those.
    priority: 0 # when mostly everything else is done
    then:
      - lambda: "id(my_desk).request_physical_limits();"
      - delay: 0.1s # give controller a chance to handle the response before sending the next command
      - lambda: "id(my_desk).request_limits();"
      - delay: 0.1s
      - lambda: "id(my_desk).request_settings();"

external_components:
  - source:
      type: local
      path: rocka84_esphome_components/components/
      # type: git
      # url: https://github.com/Rocka84/esphome_components/
    components: [ jiecang_desk_controller ]

uart:
  id: uart_bus
  tx_pin: TX
  rx_pin: RX
  baud_rate: 9600

logger:
  baud_rate: 0 # disable logging over uart, required when using the RX/TX pins for the controller

jiecang_desk_controller:
  id: my_desk
  sensors:
    height:
      name: "Height"
    height_min:
      name: "Height Min"
    height_max:
      name: "Height Max"
    height_pct:
      name: "Height Percent"
    position1:
      name: "Position 1"
    position2:
      name: "Position 2"
    position3:
      name: "Position 3"
    position4:
      name: "Position 4"
  buttons:
    move_up:
      name: "Move up"
    move_down:
      name: "Move down"
    stop:
      name: "Stop"
    step_up:
      name: "Step up"
    step_down:
      name: "Step down"
    position1:
      name: "Position 1"
    position2:
      name: "Position 2"
    position3:
      name: "Position 3"
    position4:
      name: "Position 4"
    save_position:
      name: "Save Position"
    move_up:
      name: "Move up"
    move_down:
      name: "Move down"
  numbers:
    height:
      name: "Height"
    height_pct:
      name: "Height Percent"

## lambda usage
# button:
#   - platform: template
#     name: "Step up"
#     on_press:
#       lambda: "id(my_desk).step_up();"
#   - platform: template
#     name: "Step down"
#     on_press:
#       lambda: "id(my_desk).step_down();"
#   - platform: template
#     name: "Stop"
#     on_press:
#       lambda: "id(my_desk).stop();"
#   - platform: template
#     name: "Position 2"
#     on_press:
#       lambda: "id(my_desk).goto_position(2);"
#   - platform: template
#     name: "Save Position 4"
#     on_press:
#       lambda: "id(my_desk).save_position(4);"
#   - platform: template
#     name: "Go to 100cm"
#     on_press:
#       lambda: "id(my_desk).goto_height(100);"


# the usual stuff

esp8266:
  board: esp01_1m

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: "esphome-desk"
    password: "9ebc6eac0b4e0e26b8d3b955ec660557"

captive_portal:
api:
  encryption:
    key: !secret encryption_key
ota: